• Montage
  • Montage
  • Montage
  • Montage B
  • Montage
  • Montage
  • Montage
  • Montage
  • Montage
  • Montage
  • Montage
  • Montage
  • Montage
May10

Eurobond develop new sealant

Eurobond introduces hydraulic sealer and pipe sealer for compressed air systems

Eurobond hydraulic sealer (EBA542)

Eurobond hydraulic sealer EBA542 is a thixotropic liquid that cures anaerobically to form a tough, high-pressure seal on all types of threaded couplings used on low-, medium- and high-pressure hydraulic lines. EBA542 hydraulic seal is said to be ideally suited for valves, threaded couplings, adaptors, quick disconnect parts, compression fittings and vibration proofing joints. Typical cure times of 10-10 minutes can be achieved dependant on the type of metals used. To help speed up the cure time Eurobond comments that the parts should be cleaned and local heat applied to the joints with a heat gun or soft flame. EBA542 is tolerant of a light oil film and will seal up to 400 bar on 20mm fittings. It also proofs joints against vibration and will tolerate temperatures of -55degC to + 150degC.
 
May09

Phydro hose tips

Seven ways to extend the life of industrial hoses

Hoses are common place throughout industry, providing a practical and effective method for conveying or transferring liquids and gases.

External factors found in the working environment can have an adverse effect on the hose considerably reducing its life span – factors such as extreme temperatures, humidity, sunlight, oils, solvents, surfactants, welding spatter, corrosive atmosphere or exposure to aggressive chemicals.

Although industrial hoses are generally considered consumable items and will need replacing from time to time, properly managing, using and storing hoses will help reduce and in some cases prevent premature failure, and will in most cases increase their perceived life expectancy which in turn reduces high maintenance costs.

<<  2 3 4 5 6 [78 9  >>  

Lloyds Register Logo

Lloyds Register Logo

Germanischer Lloyd Logo

RINA logo