• Montage
  • Montage
  • Montage
  • Montage
  • Montage
  • Montage
  • Montage
  • Montage
  • Montage
  • Montage B
  • Montage
  • Montage
  • Montage
May17

The basics about stainless steel

What is stainless steel?

 'Stainless' is a term coined early in the development of these steels for cutlery applications. It was adopted as a generic name for these steels and now covers a wide range of steel types and grades for corrosion or oxidation resistant applications.

May10

Eurobond develop new sealant

Eurobond introduces hydraulic sealer and pipe sealer for compressed air systems

Eurobond hydraulic sealer (EBA542)

Eurobond hydraulic sealer EBA542 is a thixotropic liquid that cures anaerobically to form a tough, high-pressure seal on all types of threaded couplings used on low-, medium- and high-pressure hydraulic lines. EBA542 hydraulic seal is said to be ideally suited for valves, threaded couplings, adaptors, quick disconnect parts, compression fittings and vibration proofing joints. Typical cure times of 10-10 minutes can be achieved dependant on the type of metals used. To help speed up the cure time Eurobond comments that the parts should be cleaned and local heat applied to the joints with a heat gun or soft flame. EBA542 is tolerant of a light oil film and will seal up to 400 bar on 20mm fittings. It also proofs joints against vibration and will tolerate temperatures of -55degC to + 150degC.
 
<<  1 2 3 4 5 [67 8 9  >>  

Lloyds Register Logo

Lloyds Register Logo

Germanischer Lloyd Logo

RINA logo